Searching Using The Remote; Checking The Disc Information - Arcam BDP-190 User Manual

Searching using the remote

You can search by entering the title/chapter/track number or
the time code (elapsed time from the beginning of the disc).
To search for a title, chapter, or track
(BD-ROM, DVD VIDEO, CD only)
1
Press GOTO and enter the title number using the
number buttons while the player is in playing mode.
- To search for a chapter, enter the chapter number
during playback.
- To search for a track, enter the track number
during playback. If you make a mistake, press
CLEAR once and re-enter.
2
Press ENTER to start playback.
To search for a specific point (BD-ROM, DVD
VIDEO, DATA DVD only)
1 During playback, press GOTO repeatedly until
Gotot
2 Enter the time code using the number buttons.
E
for 1 hour, 30 minutes and 20 seconds). If you make
a mistake, press CLEAR once and re-enter.
3 Press ENTER to start playback.
Depending on the DVD VIDEO/BD-ROM/DATA DVD/CD, these
search functions may not work.
Checking the Disc
Information
You can check the title/chapter/track information including
video transmission rate etc., by pressing INFO button. The
information differs depending on the disc type and the player
status.
Press INFO.
Example: When playing a BD-ROM.
The following information appears:
Playback status
1
Disc type(BD-ROM/DVD/CD-DA)
2
Title information
3
Currently playing title number/currently playing
chapter number.
Total playback time of the title.
4
Elapsed time of the current title
5
Play mode
6
Repeat mode
7
302
26
r of chapters within the title.