MDW 9030P Wireless Pocketphone Quick Reference Headset On/Off Press to turn the headset on if the headset is plugged in. ON appears in handset display. To turn off, press again. Turn on to make or answer a call, and turn off to “hang up.”...
Information you would see on a wired system phone's display, (except time), based on your communications system: LCL:P, D, M1, or M2= Local Mode:communications system WIRELESS TEST=Handset in Wireless Test Mode VIBR=Vibrator enabled PSEL=Line Preselection enabled PRESELECTION:ON / OFF=Line Preselection Mode:status CHANGE BUTTN MAP=Communications system setting is wrong MAP:P, D, M1, M2=Button Mapping Mode: setting NO LINK=Handset is not communicating with radio module...
To increase or decrease the volume of the handset alerter or the receiver (earpiece): Alerter: Press the "+" or the "–" button while the MDW 9030P is awake but turned off . If the display is dark (the phone is in "sleep"...
# to enter Local Test Mode. 5. Press O to exit. CAUTION: The MDW 9030P handset is a radio device and, like all radio devices, should not be placed next to a pacemaker. See "Guidelines for Safe and Efficient Operation" in MDW 9030P Wireless Pocketphone Installation and Use for more information.
Need help?
Do you have a question about the MDW 9030P and is the answer not in the manual?
Questions and answers