AudioEngine W2 Manual page 9

Note: Up to 8 Receivers may be Paired with one
Sender, allowing the Sender to Hop to multiple Receiv-
ers, one at a time. More than one Sender may also be
Paired to a single Receiver, if desired.
Hopping between Senders and Receivers:
1) Momentarily press the button on the Sender. The
status indicator will blink slowly and then go solid,
indicating that it has Hopped to the next Paired
Receiver in your system.
2) Press the Sender button again to continue Hopping
to other Receivers. You may Hop to up to 8 Paired
Receivers, one at a time.
Solid
~\~'"
Paired
(Active)
~c\\\Je
~-
Slow Blink
I -
Solid
nqCfiv. - - •
Paired
e '-ink
(Inactive)
Sender
Receiver