Advertisement
Troubleshooting
If no music is playing from your AW2 Sender/Receiver
pair, try the following tips.
Sender and/or Receiver status indicators are not lit:
• Check that the Receiver's power supply is connected
to AC power.
• Check that your iPod is playing music (the Sender's
status indicator will be off when no music is playing).
Sender and/or Receiver status indicators are blinking
slowly:
• Sender and Receiver may be out of range.
• Repeat the Sender/Receiver Pairing process (see
"About Pair and Hop Functions" section).
Sender and/or Receiver status indicators are both
solidly lit, but no music:
• Check that your music system is set to the audio input
connected to the Receiver.
• Unplug and reconnect the audio cable from the
Receiver to your music system.
• Check that your iPod is playing music.
Advertisement
