Nfc - Write Tag - Not Available; Virtual Private Network (Vpn); Add New Network; Connect To Network - Samsung Galaxy S III User Manual

With NFC, you can use your phone to quickly share pictures and other media.
Note: S Beam is only compatible with other S Beam compatible devices. Therefore, media sharing may fail with devices that do not
support S Beam.
The following media files are available for sharing:

Contacts

Music files (using Music player app)
Note: If necessary, add a music or sound file to the Music player application to make it sharable).

Pictures

Videos

Web pages
To share media using NFC and S Beam, follow these steps:
1. On the receiving device, make sure NFC is enabled.
2. From any Home screen, tap the Menu key.
3. Tap Settings.
4. Tap More settings.
5. Tap the NFC Slider to enable NFC. Slider moves right and turns green.
6. Tap NFC.
7. If necessary, tap Android Beam then tap the Android Beam Slider to turn on. Slider moves right and turns green.
8. Tap the Back key to navigate back to the More settings menu.
9. Tap S Beam.
10. If necessary, tap the S Beam Slider to enable. The slider moves right and turns green.
11. Press the Home key.
12. Navigate to the desired media file (For example, a picture in the Gallery application).
13. Gently place the back of your phone against the NFC antenna location of the other device. For most phones, place each
phone back-to-back and upright.
Note: For best results, navigate the receiving phone to its Home screen before transfer.
14. On your screen, when the "Touch to Beam" message appears, touch the file thumbnail and hold until you see the
thumbnail disappears or you see following message: "Ready to send files via S Beam. Separate devices"
15. Move phones slightly away from each other.
Note:

If a contact is sent, on the other device, tap to select an account storage location for the contact.

If a music file is sent on the other device, tap an application to open the file with.

NFC - Write tag - Not available

This feature is not available.

Virtual Private Network (VPN)

Add new network

To add a new VPN network, follow these steps:
1. From any Home screen, tap the Menu key.
2. Tap Settings.
3. Tap More settings.
4. Tap VPN.
5. If prompted, create a password, PIN, or unlock pattern.
6. Tap Add VPN network.
7. Enter the required settings.
8. Tap Save.

Connect to network

To connect to a VPN network, follow these steps: