Canon PowerShot A 2000 IS User Manual page 118

Changing Functions
The functions listed in the
tT
tab are useful functions that you can set for normal
usage. You can set them in the Shooting or Playback mode, by pressing the
8
button.
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
Select [Start-up Image], then press the ••
buttons to select [Off].
_ ....4l··....
I!t;te eff
'Iolure .
Sti.lr:-UD
I~3.ge
CK1
Changing the Display Brightness
You can adjust the brightness while checking the brightness of an image.
Select [LCD Brightness], then press the •
~
buttons to adjust the brightness.
LCD Bri9htness - , ,' __
Fo:rer 53vir 3
Cate/Ti1e ;)9.09. '06 10:0)
Turning off the Power Saving Function
You can set the power saving function (p. 42) to [Off]. However, setting to
[On] is recommended to save battery power.
Choose [Power Saving], then press the
@
button.
Press the ......... buttons to select [Auto Power
Down], then use the
~ ~
buttons to select [Off].
If you set [Auto Power Down] to [Off], be
careful not to forget to turn off the camera after
use.
118