Canon PowerShot A 2000 IS User Manual page 101

[J
Changing Image Transitions
You can select from three transition effects when switching between images
in Single Image Playback.
--
--
---
-_.
-,~~
~
- - - j
C>n
F'otect
rnJ
Rctate
I~
E'ase all
I
~
T'a,sfer Crjer :
llIk Res..
' l1€
Last see1
I
~.r:I
Select [Transition].
Press the
e
button, select the
[E
tab,
and then select [Transition] and use the
~ ~
buttons to select the desired
transition.
ex
Ixxxi
xxx
Immediately switches between images without transition effect.
Displayed image fades out as next image fades in.
Slides images left to switch between images.
11
Erasing All Images
In addition to selecting and erasing images one at a time, you can erase all
images at once. Since erased images cannot be recovered, exercise
adequate caution before erasing images. However, protected images cannot
be erased.
Select [Erase all].
Press the
e
button, select the
[E
tab.
Press the ....... buttons to select [Erase
All], then press the
@
button.
Erase all images.
Press the
~ ~
buttons to select [OK], then
press the
@
button.
All images on the memory card will be
erased.
101