Sanyo VPC-CA102BK Service Manual page 22

3. AWB Adjustment
Camera
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
Adjusting method:
1. Set a distance of 0.5-1.0 cm between the pattern box and
the camera. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Dsc Calibration
AWB Results:
1:
WB=287,537,550
CHECK=128,127,133
WB_ND=286,536,536
CHECK_ND=127,128,133
IR_TEMP_AD=419
IRIS_PWM1=215,190
IRIS_PWM2=176,172
IRIS_PWM3=158,150
IRIS_PWM4=146,138
IRIS_PWM5=123,109
MS=2402,1395
MS_M=1911,1745
MS_C=1684,1535
MS_C2=1470,1458
Fno_FOR_ISO=-1
SS_FOR_ISO=-1
YLELEL_FOR_ISO=-1
When all of the AWB adjustment screen
is not displayed, use a scroll bar.
Pattern box
(color viewer)
2
)
x
OK
Copy
Adjustment value determination is effectuated using the "WB",
"CHECK", "WB_ND", "CHECK_ND", "MS", "MS_M", "MS_C",
"MS_C2", "IRIS_PWM1", "IRIS_PWM2", "IRIS_PWM3",
"IRIS_PWM4" "IRIS_PWM5" and "IR_TEMP_AD" values. If
WB = w1, w2, w3
CHECK = wc0, wc1, wc2
WB_ND = wn1, wn2, wn3
CHECK_ND = wnc0, wnc1, wnc2
MS = ms1, ms2
MS_M = ms3, ms4
MS_C = ms5, ms6
MS_C2 = ms7, ms8
IRIS_PWM1 = s1, s2
IRIS_PWM2 = s3, s4
IRIS_PWM3 = s5, s6
IRIS_PWM4 = s7, s8
IRIS_PWM5 = s9, s10
IR_TEMP_AD = itad
the adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
wc0=128 ± 2, wc1=128 ± 2, wc2=130 ± 40
wnc0=128 ± 2, wnc1=128 ± 2, wnc2=130 ± 40
223<w1<335, 418<w3<626
223<wn1<335, 418<wn3<626
1200<=ms1<=4450, 240<=ms2<=2240,
980<=ms3<=2980, 820<=ms4<=2820,
700<=ms5<=2700, 570<=ms6<=2570,
470<=ms7<=2470, 360<=ms8<=2360
0<=s1<=255, 0<=s2<=255, 0<=s3<=255, 0<=s4<=255,
0<=s5<=255, 0<=s6<=255, 0<=s7<=255, 0<=s8<=255,
0<=s9<=255, 0<=s10<=255
s1>s2>s3>s4>s5>s6>s7>s8>s9>s10
250<=itad<=893
Adjustment values other than the above are irrelevant.
4. CMOS White Point Defect Detect Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select "CCD Defect" on the LCD "Test", and click the "Yes".
3. After the adjustment is completed, OK will display.
4. Click the OK.
– 22 –