Pausing Playback (Pause); Clock - Time; Displaying The Time; Setting The Clock - Blaupunkt Las Vegas CD32 Operating And Installation Instructions

CD CHANGER MODE
Stopping SCAN
To stop scanning,
briefly press the 2 (SCAN) button
9 again.
The currently scanned track will then
continue to be played normally.
Note:
You can set the scanning time
(scantime). For further details, read
the section entitled "Setting the
scantime" in the "CD mode"
chapter.

Pausing playback (PAUSE)

Press button 1 ( ) 9.
"S--PAUSE" appears in the display.
Canceling pause
Press button 2 ( ) 9 while in
pause mode.
Playback is resumed.

CLOCK - Time

Displaying the time

To display the time,
briefly press the

Setting the clock

Press the MENU button 5.
Keep pressing the
5 until "CLOCKSET" appears in
the display.
button 5.
Press the
The time appears in the display. The
minutes flash on and off and can be
adjusted.
Adjust the minutes using the
buttons 5.
Once the minutes are set,
button 5.
press the
The hours flash on and off.
Adjust the hours using the
buttons 5.
When you have finished making your
changes,
press the MENU button 5 twice.
Selecting 12/24-hour clock
mode
Press the MENU button 5.
Keep pressing the
5 until "24 H MODE" or "12 H
MODE" appears in the display.
Press the or
switch between the modes.
CLOCK - TIME
button ;.
or button
/
/
or button
button 5 to
15