NEC SL series Quick Reference

SL Series Mobile Extension Quick Reference Guide
Thank you for purchasing NEC "SL Series" system.
Due to the flexibility built into the system, your Dialing Codes and Feature Capacities may differ from those in this guide.
Check with your Supplier / System Administrator and make a note of any differences.
Placing Calls
Placing an Outside Call ...
Dial codes for outside lines :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
9 0
3. Dial or and Outside number.
or
8 0 4
Dial and Line group number (1-9 or 01-25)
and Outside number.
or
# 9 # 0
Dial or and Line number (e.g., 005 for
line 5) and Outside number.
Calling a Co-Worker, Paging
and Voice Mail ...
Dial using the Intercom :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
3. Dial co-worker's extension number.
Your call will ring or voice-announce. If you hear
ringing, wait for an answer. If you hear two beeps,
begin speaking. Dialing 1 changes voice/ring
mode.
or
8 0 1
For Paging, dial and 0 for All Call, or 1-32
for zones.
or
8
For your mailbox, dial .
LIABILITY DISCLAIMER
NEC Corporation reserves the right to change the specifications, functions, or features, at any time, without notice.
NEC Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC
Corporation and shall not be reproduced without prior written approval from NEC Corporation.
Copyright 2011 NEC Corporation
NEC Corporation
If your call doesn't go through ...
 Camp On and Callback
When you hear busy tone, use Camp On
or Callback :
8 5 0
1. Dial to Camp On. (Wait without hanging up)
(Intercom Calls) When you hear ringing, wait for
the called party to answer.
(Outside Calls) When you hear new dial tone,
begin dialing your number.
or
8 5 0
Dial and hang up to leave a Callback.
Wait for the system to call you back.
2. Lift handset when the system rings you back.
3. Dial to accept call.
(Intercom Calls) Speak to co-worker.
(Outside Calls) Begin dialing your number.
To cancel your Callback :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
8 7 0
3. Dial and hang up.
Answering Calls
Answering Outside / Intercom
Calls ...
Listen for ringing :
1. Lift the handset.
2. Dial to accept call.
Picking up calls not ringing
your phone ...
When a call is ringing a co-worker's phone within
your group :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
#
3. Dial .
To pick up a call at a specific co-worker's phone :
1. Lift handset.
2. Dial personal DDI or allocated number.
Listen for dial tone.
3. Dial and co-worker's extension number.
Handling Your Calls
Your call can wait at your phone ...
 Hold
Use Hold instead of leaving the handset
off-hook :
#
1. Do not hang up and dial .
This puts your call on Exclusive Hold. If you go on
hook, the held call will ring back.
To place the call on Group Hold (so only those in
your Department can pick up the call), dial 832
after dialing * #. You can go on hook.
Easily retrieve a call from Hold :
#
1. Dial .
To retrieve a call from Group Hold, dial 862
#
instead of dialing .
Have a telephone meeting
(Conference) ...
Use Conference to have a telephone meeting :
#
1. Place or answer call. Dial listen for tone, and
8 2 6
dial .
#
2. Place / answer next call. Dial listen for tone,
8 2 6
and dial .
You may have up to 16 callers. Your software
determines if there is any restriction on the
number of outside parties. Repeat this step to
add more parties.
#
3. After adding all parties, dial twice to set up
the Conference.
Transferring your calls ...
 Transfer
Send (Transfer) your call to a co-worker :
#
1. Do not hang up and dial , and dial your
co-worker's extension.
To transfer the call to a co-worker's mailbox, dial
the Voice Mail master number before their
extension.
2. (Option) Announce the call when your co-worker
answers.
3. Hang up to transfer the call through.
A50-031933-001 Issue-1.0 May 2011