ZyXEL Communications UAG Series Reference Manual page 27

Note: The default login username is admin. It is case-sensitive.
Figure 5 Web Console: Connecting
Then, the Password screen appears.
Figure 6 Web Console: Password
Enter the password for the user name you specified earlier, and click OK. If you enter the password
6
incorrectly, you get an error message, and you may have to close the console window and open it
again. If you enter the password correctly, the console screen appears.
Figure 7 Web Console
To use most commands in this User's Guide, enter
7
change to
Router(config)#
UAG CLI Reference Guide
configure terminal
.
Chapter 1 Command Line Interface
. The prompt should
27