Key Enter Method; Call With Send/End Button; Configuration Description - AddPac AP-IP230 Installation And Operation Manual

AP-IP230 IP Phone Installation Guide Version 1.0
Using Send/End Button
The functions of Call button is described in Table 3-2 below:
Configuration Description
Retrieving the
When you press the Call button and leaving the phone is on the hook, the
Recent
recent incoming calls are listed. When you select one of the calls as to highlight,
Incoming Call
you can make a call by pressing the call button again.
Placing Call
When the phone is on the hook, you can make a call by just pressing the
numeric buttons on the dial pad. Also the speed dial and recent call features of
the Call button allows you to make a call very easily.
Receiving Call
After all the settings are applied, you can press the button and use it as
to confirm
You must press OK button to apply all the settings that you have done in the Menu options. If you
*
want to keep the settings after restart, the settings must be saved to Tool Box-Save (reference to Tool
Box Menu)
AP-IP230key pad End button is used for [Table 3-3] purpose.
Category Description
Hang Off
The END button works as to hang off the phone while you are in conversation
Drop Call
When you make a call by pressing the Call button, you can use the END
button to drop the call.
[Table 3-2] Using Call Button on the Dial Pad
[Table 3-3] Using Key Pad End Button
AddPac Technology Proprietary & Documentation