AddPac AP-IP200 Installation Manual
  1. Manuals
  2. Brands
  3. AddPac Manuals
  4. IP Phone
  5. AP-IP200
  6. Installation manual

AddPac AP-IP200 Installation Manual

Data, voice, video & ip telephony solution
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AP-IP200 IP Phone
Installation Guide
[Data, Voice, Video & IP Telephony Solution]
August, 2005
AddPac Technology Co., Ltd.
Technical Sales Division
www.addpac.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP-IP200 and is the answer not in the manual?

Questions and answers

Related Manuals for AddPac AP-IP200

Summary of Contents for AddPac AP-IP200

  • Page 1 AP-IP200 IP Phone Installation Guide [Data, Voice, Video & IP Telephony Solution] August, 2005 AddPac Technology Co., Ltd. Technical Sales Division www.addpac.com...
  • Page 2 In no event shall AddPac or its suppliers disclaim all warranties, expressed or implied, including, without limitation, lost profits or loss or damage to data arising out of the use or inability to use this guide.

  • Page 3: Table Of Contents

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 [ Contents ] Getting Into AP-IP200 IP Phone Installation Guide ............8 Chapter 1. AP-IP200 Overview .......9 AP-IP200 IP Phone Hardware Specification ............... 9 AP-IP200 IP Phone Software Specification ................. 9 AP-IP200 IP Phone Front Part....................
  • Page 4 Network Setup– Service ....................... 9 System Setup Menu ......................9 System Setup – Display Name..................... 9 System Setup – Volume Control ..................9 AP-IP200 IP Phone User Interface Menu Tree..............9 KEY Input Method ......................... 9 Call/Cancel Button....................... 9 Chapter 5.
  • Page 5 Figure 3-2 LAN Interface Diagram of AP-IP200 IP Phone ............9 Figure 3-3 PSTN FXO Interface Diagram of AP-IP200 IP Phone...........9 Figure 3-4 External Audio IN/OUT Interface Diagram of AP-IP200 IP Phone....9 Figure 4-1 LCD Display Message AP-IP200 IP Phone............9 Figure 4-2 Main Display ......................9 Figure 4-3 Phonebook Menu Display..................9...
  • Page 6 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Figure 4-30 QoS Setting Menu ....................9 Figure 4-31 SIP Options Setting Menu ..................9 Figure 4-32 PSTN Prefix Menu ....................9 Figure 4-33 Phone Number Setting Menu................9 Figure 4-34 Service Setup Menu....................9 Figure 4-35 Main Menu ......................9 Figure 4-36 System Setup Menu ....................9...
  • Page 7 [Table 1-5] AP-IP200 IP Phone Rear Part Interface...............9 [Table 2-1] The contents of AP-IP200 IP Phone package box ...........9 [Table 4-1] Upper LCD Panel’s LED and Message Display of AP-IP200 IP Phone ...9 [Table 4-2] Available Characters and KEY Input Procedures ..........9 [Table 4-3] Key PAD Call Button Usage..................9...

  • Page 8: Getting Into Ap-Ip200 Ip Phone Installation Guide

    This chapter explains the AP-IP200 IP phone installation guide. [Contents of AP-IP200 Installation Guide] This guide assists users to install the AP-IP200 IP Phone easily. This guide is composed of six chapters as following. If user has previous experience to use IP Phone, please refer to the chapters user want to know directly.
  • Page 9 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 For technical support about AP-IP200 IP Phone, contact the sales department of AddPac Technology Co. Ltd AddPac Technology Co., Ltd. Fl. Jeong-Am Building, 769-12 Yeoksam-Dong, Kangnam-Ku, Seoul , Korea Phone (02) 568-3848 Fax (02) 568-3847 E-mail : info@addpac.com...

  • Page 10: Chapter 1. Ap-Ip200 Overview

    Aug. 2005 Chapter 1. AP-IP200 Overview AP-IP200 IP phone is designed to provide enhanced IP telephony functionality to meet the wide range of business user requirements. This IP telephone optimally delivers rich featured voice telephony service on ordinary internet infrastructure as well as AddPac IP-PBX environment on local LAN as a fully featured IP extension for the complete AddPac VoIP solution.
  • Page 11 VoIP signaling protocols. Privacy and Encryption Features AP-IP200 brings the network security and service security as well. With the built-in CID (Caller ID Detection) feature, user is able to know who is calling before he answers and block the incoming call. Moreover, It supports SRTP protocol by encrypting exposed voice signal to avoid being fragile to hacking or wiretapping.
  • Page 12 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Figure 1-1 AP-IP200 IP Phone Network Diagram 93 - 12 AddPac Technology Proprietary & Documentation...

  • Page 13: Ap-Ip200 Ip Phone Hardware Specification

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 IP Phone Hardware Specification [Table 1-1] AP-IP200 IP Phone HW Specification Category Specification Model AP-IP200 Product category IP Phone (Speaker Phone, Mute, Headset Interface) Microprocessor High Performance RISC Microprocessor Digit and KEY Button...

  • Page 14: Ap-Ip200 Ip Phone Software Specification

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 IP Phone Software Specification [Table 1-2] AP-IP200 S/W Specification Category S/W Specification LAN Protocol Static and IEEE 802.1Q VLAN Routing, WAN Protocol Point-to-Point Protocol (PPPoE for ADSL), etc. Audio Service Voice Codec &...
  • Page 15 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 → Spanning Tree Bridging Protocol Support → Remote Bridging Support → Concurrent Routing and Bridging Support Cisco Style Command Line Interface(CLI) Network time Protocol(NTP) Support [Table 1-3] AP-IP200 Network Protocol Specification...
  • Page 16 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 STUN Client 93 - 16 AddPac Technology Proprietary & Documentation...

  • Page 17: Ap-Ip200 Ip Phone Front Part

    The headset interface such as Mic Jack., Ear phone Jack is located at lower left side of AP-IP200. The external MIC for speaker phone is located at lower right side of AP- IP200.
  • Page 18 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Following Table 1-4 explains the KEY button’s role of AP-IP200 front side each. [Table 1-4] The KEY button’s role of AP-IP200 IP Phone Front Part KEY button Function F1~F4 Function key for AP-IP200 UI(User Interface) on Compact LCD...

  • Page 19: Ap-Ip200 Ip Phone Rear Part

    RJ45 interface for Command Line Interface, power switch and connector including two (2) Fast Ethernet for WAN/LAN interfaces. Figure 1-3 AP-IP200 Rear Part Connector Diagram Table 1-5 explains the AP-IP200 rear part connector interface. [Table 1-5] AP-IP200 IP Phone Rear Part Interface Interface...

  • Page 20: Installation Requirement

    Avoid any actions that may lead to the malfunction of the equipment or the operator. Electrical Requirement There are two main sources of electrical problems with AP-IP200 IP Phone : the power supply and static electricity. This section describes safety recommendations for each case. .

  • Page 21: General Requirement

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 General Requirement The AP-IP200 IP Phone is ready for use where electronic products are used. However, locations with the following conditions are recommended for maximum performance. A level and well ventilated location is recommended.

  • Page 22: Prerequisites For Ap-Ip200 Installation

    RS-232C console cable with RJ-45 connector (included in equipment packing box) Ethernet port AP-IP200 IP Phone has two(2) RJ45 Fast Ethernet ports in rear side. In case that you want to connect LAN using these ports, please use right cable and connector. See the cable specification in Appendix for Ethernet cable pin specifications.

  • Page 23: Unpacking

    Aug. 2005 Unpacking Before unpacking, check for external damage of the packaging box. If no external damage has been found, confirm if the following items are enclosed [Table 2-1] The contents of AP-IP200 IP Phone package box Items Contents Q’ty...

  • Page 24: Chapter 3. Ap-Ip200 Installation

    Chapter 3. AP-IP200 Installation Connecting Ethernet Interface • • Connect AP-IP200’s LAN interface to LAN interface of WAN equipment (Router or ADSL/Cable modem) with RJ45 UTP cable. • There might be some cases of direct connection to router or modem with cross-over cable.
  • Page 25 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 • AP-IP200 IP Phone’s Fast Ethernet PC Interface is supposed to be connected into Desktop PC’s LAN Port with Direct-Through cable in IP-Share mode and to be connected into HUB in NAT/PAT or Bridge mode.

  • Page 26: Connecting Pstn (Fxo) Interface

    VoIP call due to network problem. PSTN backup is implemented by connecting PSTN access-line to PSTN port, illustrated as following figure. Figure 3-3 PSTN FXO Interface Diagram of AP-IP200 IP Phone 93 - 26 AddPac Technology Proprietary & Documentation...

  • Page 27: Connecting Audio-In/Out Interface For Headset

    Aug. 2005 Connecting Audio-In/Out Interface for Headset Audio-In/Out port located at left side of AP-IP200 IP Phone is for audio devices such as MIC, Speaker System or Headset Device etc. Connect this port to MIC system or External Speaker System using ‘3.5mm stereo jack’...

  • Page 28: Ap-Ip200 Ip Phone Initial Information Display

    IP200 displays the message shown as figure 4-1. Table 4.1 explains what is the LCD display message and upper, right side’s red color LED of AP-IP200 front side. Figure 4-1 LCD Display Message AP-IP200 IP Phone [Table 4-1] Upper LCD Panel’s LED and Message Display of AP-IP200 IP Phone Description LED ON: Hook Off (Handset Pickup, Speaker Phone Mode, and Headset Mode) and Conversation Mode.
  • Page 29 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Display Name Display the Nick Name of this device. ③ Change the Nick Name using following UI menu setting (System Setup -> 1.Display Name) 93 - 29 AddPac Technology Proprietary & Documentation...

  • Page 30: Phonebook Menu

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 PhoneBook Menu Phone Book is a phone number directory in which user can search by name and number, register phone number. It also has call log and speed dial menu. Figure 4-2 Main Display...
  • Page 31 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – Phonebook Search by Name Search phone number using name registered in Phone Book. User can find right number by inputting name with KEY button and make a VoIP call by pushing call button.
  • Page 32 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 matched user name is displayed on LCD and then user can subsequently input the second letter for search. Besides, user can make a call or modify information using selected person’s information.
  • Page 33 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Figure 4-5 Phonebook Registration Menu Phonebook Registration Menu Description Indicates index number of phone number in Phone Book. This index number is for sorting in Speed Dial Index list. 93 - 33...
  • Page 34 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Input peer’s name for registering in Phonebook Input peer’s dial number for registering in Phonebook. Input peer’s IP address for registering in Phonebook If user wants to apply the registered value In Menu, user should press the OK button. And if user wants to maintain the applied value after reboot, user should press the OK button at ToolBox-SaveAll Menu.(refer to Tool Box Menu)
  • Page 35 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Dial-Out Figure 4-6 Phonebook Speed Dial Menu Phone book Speed Dial Description Display the index number in Phonebook ① Display the name in Phonebook ② Display the Dial number in Phonebook ③...
  • Page 36 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Dial-Out Figure 4-7 Phonebook Recent Call Menu 1 Main Display 93 - 36 AddPac Technology Proprietary & Documentation...
  • Page 37 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Dial-Out Figure 4-8 Phonebook Recent Call Menu 2 Phonebook recent call Description menu ① Display the index number in Recent Call History Display the name and dial number of counter party in Recent Call ②...

  • Page 38: Toolbox Menu

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 ToolBox Menu Tool Box menu consists of date/time setting, configuration saving, initialization for factory default mode and language selection. Figure 4-9 Main Menu Figure 4-10 ToolBox Main Menu 93 - 38...
  • Page 39 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – ToolBox date & time Figure 4-11 Data/Time ToolBox Menu Date/Time ToolBox Menu Description Input and modify Year setting of AP- IP200. Input and modify Month setting of AP- IP200. Input and modify Day setting of AP-IP200.

  • Page 40: Toolbox -Language

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 data/time is saved) ToolBox -Language 2.Tool Box 2. Select Language English Korean * Figure 4-12 ToolBox Language Selection Menu Language Selection Description English Language Mode Other languages including KOREAN (*will be supported) 93 - 40 AddPac Technology Proprietary &...
  • Page 41 ToolBox Factory Default Mode Initialization Factory Default mode initialization feature deletes all the configuration of AP-IP200 and all the content on phone book and recent call menu. This command reboots the system automatically. This command is not recommended to use except in inevitable case.
  • Page 42 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Tool Box– Save All This UI menu is for saving values which user inputs in UI. Once being saved, values are preserved even after rebooting. Figure 4-14 ToolBox Save All Menu 93 - 42 AddPac Technology Proprietary &...

  • Page 43: Network Setup Menu

    The network setup of AP-IP200 consists of WAN, LAN interface setting, SIP/H.323 signaling, FTP service, QoS for guaranteeing VoIP quality, call options etc. User should know this network setup menu for efficient usage of AP-IP200. This menu cannot be skipped for optimized environment.
  • Page 44 Internet Menu has functions in relevance to AP-IP200’s fast ethernet LAN interface for Internet connection. As there are various network environments, user has to configure pursuant to his or her own network environment. WAN protocols supported by AP-IP200 are DHCP, static IPv4, PPPoE, and IPv6 etc.
  • Page 45 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – Internet IPv4 Setting Figure 4-17 IPv4 protocol setting Menu IPv4 protocol setting menu Description Getting a dynamic IP address from DHCP server such as cable modem, VDSL, IP- ADSL. Set IP address manually and build WAN interface such as static IP ADSL, E1/T1 leased line.
  • Page 46 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – IPv4 Setting DHCP If user enables DHCP protocol in network setup internet menu, user gets a dynamic IP address from DHCP server such as cable modem, VDSL, IP-ADSL. Figure 4-18 IPv4 DHCP Setting Menu 93 - 46 AddPac Technology Proprietary &...
  • Page 47 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – IPv4 Setting Static IP If user wants to use static IP address, this menu helps to set a static IPv4 address manually and build WAN interface such as static IP ADSL, E1/T1 leased line, Metro ethernet, ATM, etc.
  • Page 48 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 First DNS setting (this menu can be applied at IPv6 mode) Ex> 168.126.63.1 Second DNS Setting (Option) (this menu can be applied at IPv6 mode) Ex> 168.126.63.1 If user wants to apply this input value In Menu after setting, user should press the OK button.
  • Page 49 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – IPv4 Setting PPPoE If user wants to get a dynamic IP address from PPP server, user enables the PPPoE protocol in IPv4 internet protocol setting menu to get a dynamic IP address from PPP server such as ADSL, etc.
  • Page 50 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 If user wants to apply this input value In Menu after setting, user should press the OK button. And if user wants to maintain the applied value after reboot, user should press the OK button at ToolBox-SaveAll Menu.(refer to Tool Box Menu)
  • Page 51 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Host ID. IPv6 Setting– Auto Configuration This auto configuration mode enables to get a dynamic IPv6 address from IPv6 server. Figure 4-22 IPv6 Auto Configuration Setting Menu 93 - 51 AddPac Technology Proprietary & Documentation...
  • Page 52 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – IPv6 Setting Static IPv6 Address If user wants to use static IP version 6 address, this menu helps to set a static IP version 6 address manually and build WAN interface such as static IPv6 E1/T1 leased line, etc.
  • Page 53 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Input second DNS server address Ex> 2001:230:20c:20::2 – IPv6 Setting EUI-64 IPv6 This EUI-64 IPv6 address scheme use the address combination of Network ID(64bit) and Host ID(64bit). User sets Network ID by KEY input. System MAC address is used for 64bit Host ID.
  • Page 54 – Network Setup This LAN menu is used for protocol setting of AP-IP200 second LAN interface which is used to connect PC or Ethernet Hub. None, DHCP for single (1) PC, DHCP for multiple PC are available as protocols for second fast ethernet LAN port. In DHCP protocol mode for single PC, for sharing public same IP address of AP-IP200’s WAN interface and LAN interface...
  • Page 55 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 LAN Setup Menu Description Disable the LAN Setup function (If select, use OK button) In DHCP protocol mode for single PC, for sharing public same IP address of AP- IP200’s WAN interface and LAN interface...
  • Page 56 – Network Setup VoIP This VoIP setup menu is used for SIP/H.323 VoIP signaling interworking parameter setting between SIP server, Gatekeeper and AP-IP200 IP Phone. Following figure shows the UI menu tree structure for VoIP parameter setup. 3.Network Setup 3.Voip Setup...
  • Page 57 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – VoIP Setting Signaling Setup This menu is used for VoIP signaling setup such as H.323, SIP protocol Figure 4-26 VoIP Signaling Setup Menu VoIP Signaling Setup Description SIP parameter setup menu for SIP proxy server interworking H.323 parameter setup menu for H.323...
  • Page 58 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – Signaling Setup SIP Protocol Figure 4-27 SIP Protocol Parameter Setup Menu SIP Protocol Parameter Description Input username for SIP server registration Input user password for SIP server registration. Input primary server IP address or domain of SIP server.
  • Page 59 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Select ON/OFF mode whether E.164 address is registered in SIP server or not – Signaling Setup H.323 Protocol Figure 4-28 H.323 Protocol Setup Menu H.323 Protocol Setup Description Input H.323 ID for Gatekeeper registration Input H.323 password for Gatekeeper...
  • Page 60 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Input secondary Gatekeeper IP address Select ON/OFF whether registered in Gatekeeper or not. (ON / OFF ) Signaling Setup– Select Signaling This menu is used for selecting one VoIP signaling among SIP / H.323 Protocol...
  • Page 61 – VoIP Setup AP-IP200 transfers compressed VoIP data such as G.729, G.711 voice packet. Network condition like jitter, packet loss considerably affects high quality voice stream like G.711. Sometimes, it can be a major reason of voice quality degradation problems.
  • Page 62 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 QoS function is for WAN interface and cannot be applied to LAN interface. Range of value covers 48Kbps~4Mbps – VoIP Setup SIP Options This menu is for additional functions and options of SIP protocol. The SIP options are to be updated continuously.
  • Page 63 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Enter VoIP Tag for conference service Enter conference service name Enter firewall address to check the public IP address when AP-IP200 is used under NAT/Firewall network environment. Transfer RTP Session information to listen Inband Ringbacktone of Public network under NAT/Firewall environment.
  • Page 64 When user wants to access the FXO interface for PSTN backup, this prefix number is used as PSTN access code. Additionally, AP-IP200 IP phone supports the PSTN back-up service when VoIP service is impossible due to network failure or VoIP call service is interrupted by exception.
  • Page 65 PSTN prefix number is an access code for PSTN FXO interface, default value is – VoIP Setup Phone Number This menu is used for E.164 AP-IP200 Number Assignment. Figure 4-33 Phone Number Setting Menu Phone Number Setup Description Enter the E.164 Phone Number.
  • Page 66 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – Network Setup Service This menu activates or deactivates FTP, TELNET, TFTP, SNMP protocol service of AP- IP200. 3. Network Setup 5.Service Telnet SNMP Figure 4-34 Service Setup Menu Service Setup...
  • Page 67 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Actives/Deactivates the SNMP service protocol. Default enable mode (activating SNMP service). Default port number is 161 93 - 67 AddPac Technology Proprietary & Documentation...

  • Page 68: System Setup Menu

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 System Setup Menu The system setup includes the Display Name, Ring volume control, input/output volume control. Figure 4-35 Main Menu Figure 4-36 System Setup Menu 93 - 68 AddPac Technology Proprietary & Documentation...
  • Page 69 System Setup Display Name This is Name displayed on LCD panel. Default name is AP-IP200. If user wants to change default name, change or modify the default name at Display Name in System Setup Menu. Figure 4-37 Display Name Menu Display Name Description.
  • Page 70 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – System Setup Volume Control This volume menu controls the Ring volume, Input/Output volume (Speaker volume, Handset volume) of AP-IP200 IP Phone. 5. System Setup 2. Volume Setup Ring Volume Input Volume...

  • Page 71: Ap-Ip200 Ip Phone User Interface Menu Tree

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 IP Phone User Interface Menu Tree If user presses the MENU button, user can see the all MENU tree shown as Figure 4-39. Also, user uses the MENU KEY at conversation mode.
  • Page 72 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 93 - 72 AddPac Technology Proprietary & Documentation...
  • Page 73 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Figure 4-39 AP-IP200 Menu Tree 93 - 73 AddPac Technology Proprietary & Documentation...

  • Page 74: Key Input Method

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 KEY Input Method This parts explains the KEY input method and available characters used in AP-IP200 Figure 4-40 KEY PAD Diagram [Table 4-2] Available Characters and KEY Input Procedures KEYs Characters Description 1 <...

  • Page 75: Call/Cancel Button

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 ⇒ Ex1) Apple Input “ 2 5time + 7 2 time + F2 + 7 2time + 5 4time + 3 3time “ ⇒ Ex2) 2005/09/14 Input “ 2 + 0 + F2 + 0 +5 + # 2 time + 0 + 9 + # 2time + 1 + 4 Ex3) 2aB Input ⇒...
  • Page 76 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Call Cancel While the VoIP call is proceeding using Call button, if user presses the Cancel Button, Dial-out Call proceeding is cancelled. If user presses the Cancel button in UI menu tree, Menu tree is Menu Tree level change changed from current level to one (1) upper level.

  • Page 77: Basic Cli Command For Network Setup

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Chapter 5. AP-IP200 Network Configuration Basic CLI Command for Network Setup * CLI command for current network status IP200# show run Building configuration... Current configuration: hostname IP200 username root password router administrator interface Loopback0 ip address 127.0.0.1 255.0.0.0...
  • Page 78 --- 172.20.1.1 ping statistics --- 5 packets transmitted, 5 packets received, 0% packet loss' round-trip min/avg/max = 0/4/5 ms IP200# If ping test from AP-IP200 to default router is OK, network configuration setup is finished. 93 - 78 AddPac Technology Proprietary & Documentation...

  • Page 79: Chapter 6. Appendix

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Chapter 6. Appendix This Appendix provides information about the Pinout specifications of the following cables used with AP-IP200 IP Phone. Console Port Signal and Pinout (RJ-45 to DB9) Ethernet UTP Cable Assemble (RJ-45 to RJ-45) Pinout [RS-232C Console Port Signal &...
  • Page 80 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 [UTP Cable (RJ-45 to RJ-45) Pinout Specification] In order to connect the LAN port of this equipment with other equipments (i.e. HUB), the RJ- 45 to RJ-45 Ethernet Cable is used. The RJ-45 Connector Pin sequence is provided below and the signal and Pinout specifications are enlisted at the below table.

  • Page 81: Glossary

    AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Glossary Terms Definition & Description ADSL An acronym for Asymmetric Digital Subscriber Line, ADSL is a method of transmitting data over traditional copper telephone lines. Data can be downloaded at speeds of up to 1.544 Megabits per second and uploaded at speeds of 128 Kilobits per second (asymmetric).
  • Page 82 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Cable Modem A modem designed to operate over cable TV lines. Because the coaxial cable used by cable TV provides much greater bandwidth than telephone lines, a cable modem can be used to achieve more bandwidth. Cable network also requires modularization and demutualization process while sending the data.
  • Page 83 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 75Ω cable for analog signal process and high speed digital signal process. An acronym for COder-DECoder 1. Built-in circuit device for coding/decoding CODEC of analog signal to bit stream with Pulse Code Modulation method. 2. DSP...
  • Page 84 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 the document and the resulting bit stream is then sent to the receiving machine via telephone line. The transmission and the reproduction at a distance of still pictures printed matter and similar documented material...
  • Page 85 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 management and locating gateways. A gatekeeper maintains a registry of devices in the multimedia network. The devices register with the gatekeeper at startup and request admission to a call from the gatekeeper.
  • Page 86 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 nodes with either IPv4 or IPv6 can handle packets formatted for either level of the Internet Protocol. Users and service providers can update to IPv6 independently without having to coordinate with each other.
  • Page 87 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 physical address. Compare with network address. A data network designed for a town or city. MANs are considered larger than LANs but smaller than WANs. Compare with: LAN, WAN. MGCP MGCP, also known as H.248 and Megaco, is a standard protocol for handling the signaling and session management needed during a multimedia conference.
  • Page 88 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 between the user and the ISP. Developed in 1994 by the IETF and superseding the SLIP protocol, PPP establishes the session between the user's computer and the ISP using its own Link Control Protocol (LCP). PPP supports PAP, CHAP and other authentication protocols as well as compression and encryption.
  • Page 89 Initiation Protocol is specified in IETF Request for Comments [RFC] 2543. SmartViewer The real-time monitoring, statistical data search and management GUI based software developed by AddPac Technology for AP-GK1000, AP-GK2000, AP- GK3000 models. SNMP Simple Network Management Protocol. Network management protocol used almost exclusively in TCP/IP networks.
  • Page 90 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 collection, performance, and security. Refer to: SGMP, SNMP2. A TDM physical transmission standard consisting of two twisted wire pairs and related equipment capable of carrying a 1.544 Mbps DS-1 signal. Term often used interchangeably with DS-1.
  • Page 91 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 a serial line. VoIP (Voice delivered using the Internet Protocol) is a term used in IP VoIP telephony for a set of facilities for managing the delivery of voice information using the Internet Protocol (IP). In general, this means sending voice information in digital form in discrete packets rather than in the traditional circuit-committed protocols of the public switched telephone network (PSTN).
  • Page 92 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AddPac Technology Co., Ltd. 2F & 3F, Jeong-Am Bldg., 769-12 Yeoksam- dong, Gangnam-gu, Seoul, 135-080, Korea Tel: +82 2 568 3848 Fax: +82 2 568 3847 Email: sales@addpac.com http:// www.addpac.com 93 - 92...
  • Page 93 AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 93 - 93 AddPac Technology Proprietary & Documentation...

Table of Contents