Advertisement
Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using a
soft dry brush or dry cloth.
Regularly clean the motor housing using a clean damp
cloth. Do not use any abrasive or solvent-based
cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your tool needs replacement,
or if it is of no further use to you, think of the protection of the
environment. Black & Decker repair agents will accept old
Black & Decker tools and ensure that they are disposed of in
an environmentally safe way.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Technical data
Voltage
Power output
Oscillations (no-load speed)
Orbits (no-load speed)
W
e
g i
t h
Level of sound pressure according to EN 60745:
Sound pressure (L
) 78 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 89 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum)
according to EN 60745:
Vibration emission value (a
uncertainty (K) 2.7 m/s
EC declaration of conformity
MACHINERY DIRECTIVE
KA295/KA300
Black & Decker declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN60745-1, EN60745-2-4
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of Black
& Decker.
Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe,
210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
01-12-2010
KA300
KA295
TYPE 1
TYPE 1
Vac 230
230
W 135
125
-1
min
22,000 22,000
-1
min
11,000 11,000
g k
1.2
1.2
2
) 9.0 m/s
,
h
2
7
Advertisement
