Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Black & Decker KA200
Summary of Contents for Black & Decker KA200
- Page 1 ® KA200 KA210 KA220 KA230...
- Page 2 Congratulations! On the purchase of your Black & Decker multi sander. To ensure the best results from your multi sander please read these safety and usage instructions carefully. If you have any questions or queries after reading this user manual please do not hesitate to call our Service and Information Centre, whose number you will find towards the back of this user manual, or one of our...
-
Page 3: Table Of Contents
Contents Page 4 Safety instructions Additonal precautions to take when sanding paint and MDF Page 5 Personal safety Environmental safety Cleaning and disposal Double insulation Electrical safety Mains plug replacement Page 6 Extension cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black &... -
Page 4: Safety Instructions
Multi sander user manual SAFETY INSTRUCTIONS • Maintain the tool with care. Keep a cutting tool Warning! When using electric tools, the following sharp and clean for better and safer performance. basic safety precautions should always be taken to Follow the instructions for lubricating and changing reduce the risk of fire, electric shock and personal accessories. -
Page 5: Personal Safety
ENGLISH Any pre-1960 building may have been painted in the against injury resulting from a possible electrical insulation failure within the tool. past with paint containing lead, and covered by additional layers of paint. It is important to determine ELECTRICAL SAFETY whether the paint that is being sanded contains lead Be sure the supply is the same as the voltage given on before beginning work. -
Page 6: Extension Cables
ENGLISH Black & Decker service agent because special and after sales service, but if help or advice is needed purpose tools are required. please contact your local Black & Decker authorised repair agent who will be happy to help. Full details of EXTENSION CABLES our after sales service and a list of these agents can be Up to 30m (100ft) of 3-core extension cable can be used... -
Page 7: Operating Your Multi Sander
Rust removal rear. This permits you to sand large areas with areas USING YOUR MULTI SANDER AS A RANDOM ORBITAL and corners that have easy access. SANDER (KA200/KA220/KA220E/KA230E) FITTING THE POINTED BASE With the round base Proceed as follows: fitted, you can use your Disconnect the plug from the electricity supply. -
Page 8: Reversing The Pointed Base
ENGLISH washer in position on the base and fit the screw using turn the holder. Spare holders are available as the allen key provided. Press the base on firmly when accessories. tightening the screw. FITTING THE PROFILE BASE (KA230E) REVERSING THE POINTED BASE Proceed as follows: (KA210/KA210E/KA220/KA220E/KA230E) Disconnect the plug from the electricity supply. -
Page 9: Removing The Side Handle
EC DECLARATION OF CONFORMITY together, adjacent to We declare that units: the finger grips and pull KA200, KA210, KA210E, KA220, KA220E, KA230E the bag gently. Empty conform to 89/392/EEC, 89/336/EEC, EN55014, the dustbag and 73/23/EEC, EN55104, EN50144 replace on the sander. - Page 10 ENGLISH A weighted sound power 90.1dB (A) Hand/arm weighted vibration <2.5m/s Brian Cooke - Director of Engineering Black & Decker Ltd, Spennymoor, County Durham DL16 6JG United Kingdom The Black & Decker policy is one of continuous improvement to our product and as such we reserve the right to change the product specification without prior notice.
- Page 12 Part no: 375614 2/99.4...