Adjustment And Repair Procedures; Option Setting - Sanyo CE32FWH2F-C Service Manual

OPTION SETTING

[After replacing the Memory IC (IC803)]
The memory IC, IC803, stores the option data of TV set and service adjustments data for each circuit, therefore,
when the memory IC is replaced, it should be performed following setting and "SERVICE ADJUSTMENT" on next
page.
To enter to the Option Mode
+ Press and hold the F/OK button on the remote control and P
window will appear on the screen.
To set the option mode
+ Highlight the desired option item by using the P
+ To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button.
+ The data which is set in the option mode is stored into the memory IC automatically.
Following table shows the available option items and default setting mode.
Option Mode
ON-TIMER
PLUG AND PLAY
WELCOME TEXT
BBE
AUTO VOLUME
HEADPHONE
CRT 16:9 MODE
NOISE REDUCTION ON or OFF
COUNTRY
Exit from the Service Mode
+ Press the MENU
ON-TIMER
PLUG AND PLAY
WELCOME TEXT
BBE
AUTO VOLUME
HEADPHONE
CRT 16:9 MODE
NOISE REDUCTION
COUNTRY
OPTION MODE FOR CE32FWH2F-C-00
Mode
ON or OFF
ON or OFF
ON or OFF
ON or OFF
OFF or ON
ON or OFF
ON or OFF
UK, IRE
BG/DK / I / LL'
button.
button on the front panel of the TV. The option
ON
ON
ON
OFF
OFF
OFF
ON
OFF
UK
or P button .
Description & Note
On-timer available, default "ON"
Plug and Play mode, default "ON"
Display message when first set up, default "ON"
BBE sound mode, default "OFF"
Default "OFF"
Headphone control , default "OFF"
Default "ON"
Default "OFF"
TV system, default "UK"
-5-
C6BLL