Adjustment And Repair Procedures - Sanyo CE28DFN3-B Service Manual

OPTION SETTING
[After replacing the Memory IC (IC801)]
The memory IC, IC801, stores the option data of TV set and service adjustments data for each circuit, therefore,
when the memory IC is replaced, it should be programmed to the following settings and "SERVICE ADJUSTMENT"
on pages 6 to 9.
To enter to the Option Mode
+ Press and hold the F/OK button on the remote control and P
window will appear on the screen.
To set the Option Mode
+ Highlight the desired option item by using the P
+ To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button.
+ The data which is set in the option mode is stored into the memory IC automatically.
The following table shows the available option items and default setting mode.
Option Mode
SORT MODE
PLUG & PLAY
WELCOME TEXT
AUTO VOLUME
SURROUND
VIRT SUB WOOFER ON or OFF
WIDE
AV3
Exit from the Service Mode
+ Press the MENU
/ i
SORT MODE
PLUG & PLAY
WELCOME TEXT
AUTO VOLUME
SURROUND
VIRT SUB WOOFER
WIDE
AV3
OPTION MODE FOR CE28DFN3-B-00
Mode
SORTING or
TUNING
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
button.
button on the front panel of the TV. The option
OPTION
SORTING
ON
ON
OFF
ON
ON
ON
ON
ADJUST : EXIT : RECALL
or P button .
Description & Note
Tuning mode, default "SORTING"
Plug & Play mode, default "ON"
Display message when first set up, default "ON"
Auto volume default "OFF"
Surround sound default "ON"
Virtual Sub Woofer default "ON"
Wide mode, default "ON"
Front AV disable, default "ON"
-5-
C7VDS