Specifications - Miele DGC 6805 XL Installation Manual

PureLine Plumbed Combi-Steam Oven
DGC 6805 XL

SPECIFICATIONS

DGC 6805 XL — Item 23680552USA
Overall Unit Width - Excluding Fascia Dimension
Overall Height - Excluding Fascia Dimension
Overall Unit Depth - Excluding Fascia Dimension
Oven Door Clearance
Depth with door open
Overall Fascia Dimensions
Built-In
Minimum Cabinet Width
Minimum Cabinet Depth
Minimum Cabinet Opening Height
Minimum Base Support
Additional Cut-outs Required
Plumbing
Water Supply Requirements
Drainage Requirements
Plumbed Hose Connection
Electrical
Electrical Requirements
Power Cord
Cut out for power cord
Electrical Rating
Total Amps
Shipping
Shipping Weight
Shipping Dimensions
Support
Call
20/20
21 / " (548mm)
9
16
17 / " (449mm)
11
16
21 / " (550mm)
5
8
13" (330mm)
34 / " (898mm)
11
16
23 / " (595mm) W x 18" (455.5mm) H
7
16
x / " (22mm) D
7
8
22 / " — 22 / " (560 - 568mm)
1 3
16 8
21 / " (555mm)
7
8
17 / " — 17 / " (450 — 452mm)
11 13
16 16
60 lbs
Venting and plumbing cut-out required
19 / " x 1 / " (500 x 40 mm)
11 9
16 16
Connect to a cold water supply only. Must
be connected to a shut-off valve. The water
shut-off valve must be accessible after
installation. The water pressure must be
between 14.5 psi (1 bar) and may not
exceed 87.02 psi (6 bar). If the pressure is
higher than 87.02 psi (6 bar), a pressure
reducing valve must be installed. The
supplied hose has a length of 59" (1500mm).
The hose must not be shortened. The entire
hose length must not exceed 24'7" (7.5m).
Drain hose loop may be positioned at or
above the flood level of the sink or drain
board to which it is connect to provide the
proper air gap. The top of end the drain hose
must not be higher than 19 / " (500mm) to
11
16
where it connects to the drain trap.The drain
hose must not be shortened. The entire hose
length must not exceed 24'7" (7.5m). See
installation manual for additional
information.
Supplied hose: flexible braided 4'11"
(1.5m) with / " O.D. fitting for connection to
3
8
a shut off valve
240V 60Hz 20A
Molded plug - NEMA 6-20, 240V power cord
Minimum 3" square
2.7kW (240V)
11.25A on 240V
65 lbs
26 / " (666mm) W x 21 / "(549mm) H x
7 5
32 8
23 / " (535mm) L
1
16
800.843.7231
82020technologies.com
FOREVER BETTER
DGC 6805 XL
Page 3 of 15