Using The Setup Wizard - D-Link DWL-3150 Install Manual

Using the Setup Wizard

Connect a standard Ethernet cable from the DWL-3150 to an Ethernet
port on the computer that will be used to configure the DWL-3150.
You must assign your computer a static IP address within the same
range as the IP address of the DWL-3150. The DWL-3150's default
192.168.0.30
IP address is with a Subnet Mask of 255.255.255.0.
If your network is using another network (I.E. 192.168.1.xxx), then
configure only 1 computer using the steps below.
Step 1
XP - Click on Start > Control Panel > Network
Windows
®
Connections.
2000 - From the desktop, right-click My Network Places
Windows
®
> Properties.
Step 2
Right-click on the Local Area Connection which represents your
D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address of
192.168.0.10 and a subnet mask of 255.255.255.0. Do not enter a
gateway or DNS server address.
Step 5
Click OK twice to save your settings.
You will now be able to connect to the DWL-3150 to configure it. Once
configured, you may change your computer's IP settings back.
D-Link DWL-3150 Install Guide