•
Suspend Mode
The default value is Disable.
Disabled
1 min - 1
Hour
•
HDD Power Down
The default value is Disable.
Disable
1-15 mins.
l
Suspend Mode Option
The default value is PowerOn Suspend
PowerOn Suspend
Suspend to Disk
•
VGA Active Monitor
The default value is Disabled.
Disabled
Enabled
•
Soft-off by PWR-BTTN
The default value is Instant-Off.
Instant-off
Delay 4 Sec.
•
Resume by Alarm
The default value is Disabled.
Disabled
Disable Suspend Mode.
Setup the timer to enter Suspend Mode.
Disable HDD Power Down mode function.
Enable HDD Power Down mode between 1 to 15 mins.
Set the system to PowerOn Suspend mode
Set the system to Suspend to Disk mode
Disable monitor VGA activity.
Enable monitor VGA activity.
Soft switch ON/OFF for POWER ON/OFF
Soft switch ON 4sec. for POWER OFF.
Disable this function.
4-17
BIOS Configuration