Table of Contents
Advertisement
GA-686LX3
•
Floppy 3 Mode Support (for Japan Area)
Disabled
Drive A
Drive B
Both
•
Video
The category detects the type of adapter used for the primary system
monitor that must match your video display card and monitor. Although
secondary monitors are supported, you do not have to select the type in
setup.
EGA/VGA
CGA 40
CGA 80
MONO
•
Halt on
The category determines whether the computer will stop if an error is
detected during power up.
NO Errors
All Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
Normal Floppy Drive.
Drive A is 3 mode Floppy Drive.
Drive B is 3 mode Floppy Drive.
Drive A & B are 3 mode Floppy Drives.
Enhanced Graphics Adapter/Video Graphics Array. For
EGA, VGA, SVGA, or PGA monitor adapters
Color Graphics Adapter, power up in 40 column mode
Color Graphics Adapter, power up in 80 column mode
Monochrome
adapter,
monochrome adapters
The system boot will not stop for any error that
may be detected
Whenever the BIOS detects a non-fatal error the
system will be stopped and you will be prompted
The system boot will not stop for a keyboard
error; it will stop for all other errors
The system boot will not stop for a disk error; it
will stop for all other errors
The system boot will not stop for a keyboard or
disk error; it will stop for all other errors
includes
4-6
high
resolution
Advertisement
Table of Contents
