Table of Contents
Advertisement
GA-686LX3
•
Memory Buffer Strength
The default value is Middle.
Middle
Low
High
•
DRAM Data Integrity Mode
The default value is Non-ECC.
Non-ECC
ECC
•
Video RAM Cacheable
The default value is Disabled.
Disabled
Enabled
•
16 Bit I/O Recovery Time
The default value is 1.
1-4
NA
•
Memory Hole At 15M-16M
The default value is Disabled.
Disabled
Enabled
For Middle Memory Buffer strength.
For Low Memory Buffer strength.
For High Memory Buffer strength.
For 64bit standard type DIMM module.
For 72bit ECC type DIMM module.
Disable this function.
Enable this function to get better VGA performance;
while some brands of VGA must be disabled this
function (e.g.ET4000W32P).
Set 16 Bit I/O recovery time from 1 to 4.
None.
Normal Setting.
Set Address=15~16MB remap to ISA BUS.
4-14
Advertisement
Table of Contents
