LASER RADAR SENSOR
The laser radar sensor is used for ve-
hicle- to- vehicle distance control cruis-
ing.
If dirt is on the sensor glass, the
dynamic laser cruise control function is
automatically cancelled and a warning
code
appears
on
the
display.
"VEHICLE- TO- VEHICLE
DISTANCE
CONTROL MODE FAILURE WARNING"
on page 183.)
However, if the glass sensor is covered
with icicle or any substance, dirt may
not be detected.
'06 AVALON_U (L/O 0508)
Before driving in the vehicle- to- vehicle
distance control mode, make sure the
radar sensor glass is clean.
This product is a class I laser product
complied with 21 C.F.R part 1040.10
and 1040.11.
CAUTION
To ensure that dynamic laser cruise
control will function properly while
driving, observe the following:
D
Always keep the laser radar sensor
glass clean. When cleaning, use a
soft cloth and be careful not to
damage the sensor.
D
Avoid strong impacts around the la-
ser radar sensor. An incorrect laser
radar sensor alignment will result in
(See
system malfunction. A special de-
vice is required to adjust the laser
radar sensor alignment. Be sure to
have the sensor adjusted by your
Toyota dealer.
D
Do not affix a sticker (including a
transparent sticker) or attach an ac-
cessory around the laser radar sen-
sor.
I n f o r ma t i o n P r o v i d e d b y :
VEHICLE- TO- VEHICLE
DISTANCE
CONTROL MODE FAILURE WARNING
If there is trouble somewhere in the dy-
namic laser cruise control while the ve-
hicle- to- vehicle distance control mode is
on, the master warning light comes on
and the alarm sounds, and one of the
warning codes "C1", "C2" or "E3" will ap-
pear on the display. Dynamic laser cruise
control is automatically cancelled.
If
"E3"
appears
on
the
display,
"CRUISE" indicator light in the instrument
cluster also flashes.
the
183