Tuner Mode - XZENT X-302MH Manual

TUNER MODE

1
13
3
3
4
11
3 3
5 6 7
Operation buttons Tuner Mode
1. Source Tap to jump to Main Menu
2. Clock Time Shows clock time
3. Preset Tap to select Preset
Tap & hold to save current frequency as Preset
4. Played Station Shows station name and radio text, if available
5. AS Tap to perform automatic station memory
6. PREV Tap to jump to the previous station
7. Adjust down Tap to adjust frequency 100 kHz down
8. Adjust up Tap to adjust frequency 100 kHz up
9. NEXT Tap to jump to the next station
10. More Tap to open pop up menu for tuner settings
Information fi elds
11. Left info fi eld ST = stereo
LOC = Find strong stations only
Band = Shows active Band
12. Right info fi eld Shows if Traffi c Announcement is set to ON
Program type info
Frequency information
13. Active TA On active TA broadcast in other sources, tap to cancel
10
2
3
12
3
8 9
10
1
2
3
4
5
More Menu (PopUp)
1. AF Tap to turn off/on AF function
2. TA Tap to turn on/off TA function
3. LOC Tap to turn on/off LOC
4. BAND Tap to switch through radio band (FM1 > FM2 > FM3 > AM1 > AM2)
5. SPre Turn on/off Smart Preset
Note
Selected and active items are highlighted in orange.
■
This unit features an RDS tuner. The RDS system encodes and transmits data inside the FM radio
■
carrier signal. Availability and content of the RDS data depend on the respective broad cast
station and its signal strength. RDS does, for example, transmit alternative frequencies which
allow for frequency changes without user interaction. AM band does not support any RDS
function.
You need to have the AF function activated in order to use the RDS functionality and its features.
■
11