MICA IL-800 ZONE 0 User Manual

Table of Contents

Download this manual

The Finnish MICA series rechargeable lamps are efficient and reliable tools.

To get the best benefit from your lamp, read these user instructions before using the product. Use of the

Mica product must be controlled and accepted by the operator. Personnel using the Mica product must

be authorised by the operator or a designated representative. The operator is responsible for the correct

Use and maintenance of the product. Repair of the Mica product must be carried out by a competent

party that is authorised by the manufacturer.

NOTE CORRECT CERTIFICATION:

MICA IL-800 is available in two certified versions. Check that the certification of your lamp is correct

to the environment where it is used! Certification is marked to the ID-Plate.

The battery self discharges during storage and it must be recharged prior to use.

The lamp is charged using a MICA charger suitable for the lamp and the charger must never be

placed in a potentially explosive environment. We recommend that you always store the lamp in its

charger. Please read the manual for the charger as well.

Manufacturer: ATEXOR OY

P.O.Box 89, FIN-60101 SEINÄJOKI

Tel: +358-207 343 250

Internet: www.atexor.com

ID-Plate:

MICA IL-800 ZONE 0 and

MICA IL-800 ZONE 1

USER INSTRUCTIONS

ATEX Directive Compliant

IECEx Scheme Certified

Table of Contents

Do you have a question about the IL-800 ZONE 0 and is the answer not in the manual?

Page 1 The operator is responsible for the correct use and maintenance of the product. Repair of the Mica product must be carried out by a competent party that is authorised by the manufacturer.
Page 2 Users may replace only those parts that are listed in spare parts list and can be purchased as spare parts from MICA dealer. Replacing other parts is allowed only by MICA SERVICE! Note that the certification issued for the MICA IL-800 lamp requires that only original MICA spare parts are used in the lamp.
Page 3 SPARE PARTS: Note that the certificate issued for the MICA IL-800 lamp requires that only original MICA spare parts are used in the lamp. You can change the shape of the beam by choosing narrow or wide LED-lenses, which are available as optional spare parts.
Page 4 Atexor service agent only. For maintenance repair, please send the lamp and the charger stand as well as the purchase receipt with the product. Note! A new MICA lamp/battery must be taken into use or recharged within three (3) months of manufacture.