The After Sales Service Policy; Accessories; Technical Data; Features - Black & Decker KC9045 User Manual

ENGLISH

THE AFTER SALES SERVICE POLICY

(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service, but if help or advice is needed
please contact a local Black & Decker authorised
repair agent manager who will be happy to help. Full
details of our unique after sales service can be obtained
from any of our Black & Decker authorised repair agents.

ACCESSORIES

Black & Decker offer a complete range of screwdriver
and drill bits. We recommend that only Black & Decker
accessories are used. To enhance the performance of
your drill further we recommend the use of Bullet drill
bits. Please consult your local Black & Decker dealer
for details.

TECHNICAL DATA

The level of sound pressure of the tool is in accordance
with EEC legislation. It is recommended that you take
appropriate measures for the protection of your hearing
if the sound level seems uncomfortable. This normally
equates to a sound pressure in excess of 85dB (A).
Note: This user manual also covers catalogue numbers
ending with a letter suffix. Refer to your carton for
details of your product.

FEATURES

6 •
5
4
6
@ @ @ @ @ @ @ @ @ P P @ y @ P @ @ @ P @ @ @ P @ @ @ P @ @ @ P @ @ @ P @ @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P P
y P @ @ @ @ @ @ P @ P @ P @ @ P @ @ P @ @ @ P @ @ @ P @ @ @ P @ @ @ P @ @ @ P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @
•
•
•
•
•
•
•
1. Forward/reverse switch
2. On/off switch
3. Lock-off button
4. Charger
5. Charging socket
6. Chuck
7. Chuck key
8. Screwdriver bits
• The on/off switch is used to operate your drill in all
modes of operation. It also controls the speed of
your drill.
• The lock-off button prevents accidental starting of
your drill. When the lock-off button is in the top
position, you cannot start your drill.
• Your drill is supplied with a double function screwdriver
bit. To remove, pull firmly from the recess. To
replace, push firmly until it clicks into place.

CHARGING YOUR CORDLESS DRILL

Important! If your drill is new, the battery must first be
@@ yy PP @@ PP @@ PP @@ PP @@ PP @@ PP @@ @@ PP PP PP PP PP PP @@ PP @@ PP PP @@ PP PP @@ PP PP PP @@ PP PP PP PP PP PP PP @@ PP PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@
charged. A new drill, or one which has not been used
1
for an extended period, achieves full performance only
2
after approximately 5 charging and discharging cycles.
3
Before attempting to charge your drill, read all the
yy PP @@ PP PP PP PP PP PP PP @@ PP @@ PP PP @@ PP PP @@ PP PP PP @@ PP PP PP @@ PP PP PP @@ PP PP PP @@ PP PP PP @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ PP @@ @@ @@ @@
safety instructions.
To charge your drill, proceed as follows:
8
7
Plug the output cord of the charger into the socket in
the bottom of the drill handle. Plug the charger into a
standard 220/240V socket. After normal usage your drill
should be fully charged in 3 hours or less. If your drill is
The forward/reverse
switch controls the
direction of rotation.
Push the lock-off button
to the top position.
Remove all accessories
from the chuck.