Page 2
Congratulations! On the purchase of your Black & Decker cordless drill. To ensure the best results from your cordless drill please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
Contents Page 4 Safety instructions Additional drill and charger safety instructions Page 5 Double insulation Electrical safety Mains plug replacement Extension cables The Black & Decker guarantee After sales service for your Black & Decker product Page 6 The after sales service policy Accessories Technical data Features...
Cordless drills user manual • Remove adjusting keys and wrenches. Form the habit SAFETY INSTRUCTIONS of checking to see that keys and adjusting wrenches Warning! When using electric tools, the following are removed from tool before switching it on. basic safety precautions should always be taken to •...
ENGLISH changing accessories, ensure that the lock-off MAINS PLUG REPLACEMENT button is in the top position. Should the mains plug or cordset of your charger be • When driving screws into walls, floors etc., check damaged, it must only be replaced by an authorised where “live”electrical wires may be encountered.
ENGLISH THE AFTER SALES SERVICE POLICY 1. Forward/reverse switch (UK, AUSTRALIA AND NEW ZEALAND ONLY) 2. On/off switch It is our aim that all Black & Decker customers should 3. Lock-off button be totally satisfied with their Black & Decker product 4.
ENGLISH FITTING THE DRILL OR SCREWDRIVER BIT run down completely it Make sure the lock-off switch is in the top position. may take up to 8 hours to Rotate the barrel of the become fully charged. chuck until the jaws are Your drill was sent from sufficiently open.
TOOL CARE EC DECLARATION OF CONFORMITY Do not put excessive pressure on your drill. Use We declare that units: KC9045, KC9049 sufficient pressure to keep your drill/driver biting, but conform to 89/392/EEC, 89/336/EEC, EN55014, do not push hard enough to stall the motor.
Page 10
Australia Black & Decker (A’asia) Pty Ltd Tel: 03 9213 8200 286-288 Maroondah Highway Fax: 03 9726 7150 North Croydon, Victoria 3136 New Zealand Black & Decker Tel: 09 579 7600 483 Great South Road Fax: 09 579 8200 Penrose, Auckland South Africa Black &...