You can adjust the sensitivity in each window.
To adjust sensitivity in auto mode
1. Press
MENU
2. The unit asks which you wish to adjust. Press ← or→ to select the
one you want |
3. The Sensitivity Control Bar appears. Press ↓ to decrease sensitivity;
press ↑ to increase sensitivity. When it's set at the desired level, press
. (When you reach the maximum or minimum limit, a tone sounds.)
EXIT
The Split Frequency Sonar Chart page allows you to adjust
Digital Data/Chart
This mode shows the chart on the right side of the screen. The left side has
five digital boxes containing: Depth; Water Speed (from an optional speed
sensor); Water Distance (distance traveled or log – it also requires a speed
sensor); Water Temperature and Voltage.
Split Frequency Sonar Chart page, with
50 kHz view (left) and 200 kHz view (right).
|
.
ENT
.
ENT
sensitivity separately for each window.
70