Table of Contents
Advertisement
BATTERY SETUP
To install the battery in your handset:
1. Open the battery compartment cover located at the bottom of the
handset.
2. Plug the battery connector into the socket.
3. Place battery in the battery compartment.
4. Replace the battery compartment cover by sliding it into place. (The
cover clicks into place when it is secured).
NOTE: The handset comes with the battery already installed.
CHARGING HANDSET BATTERIES
You must charge the handset batteries for 15 continuous hours the first
time you use them.
When the battery icon in the top right corner on the LCD screen appears
empty, or if you hear a warning beep during a call, please:
• End the call as soon as possible.
• Charge the handset by putting it back on the base cradle. (The handset
will begin to beep to indicate that the handset is charging).
LOW BATTERY CHARGING
When the battery is low and has only 4 minutes of talk time left, the
handset will beep a warning tone and the LCD display will flash "Low
Battery". When this happens, please end the call as soon as possible,
and put the handset back on the charger until the battery symbol returns
to high level.
HANDSET RECEPTION
Usually, a loss of reception means you are too far from the base unit, or
there is interference between the base unit and handset. Make sure to:
• Stay within a range of 300 meters (984 feet) from the base unit while
using the handset.
• Avoid interference such as TV or other electrical appliances.
NOTE: If your handset is out of range of the base unit, the range
symbol
starts flashing.
5
Advertisement
Table of Contents
