Ep-35 Temperature Configuration; Advanced Options Menu; Instance - Lowrance GlobalMap 5300C iGPS Operation Instructions Manual

EP-35 Temperature Configuration

To input Device Name:
1. Press
MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the temp sensor you want to rename and press
vice Configuration menu will appear with the Device Name dialog box
highlighted.
and use ↑ ↓, ← → to input the desired name for the temp
4. Press
ENT
sensor. Press
play.
To select Temp Type:
1. Press
MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the desired temp sensor and press
tion menu will appear.
4. Highlight
T
will appear: Water, Outside, Inside, Engine Room, Cabin, Live Well,
Bait Well, Refigeration, Heating System and Unknown.
5. Highlight the desired Temp Type and press
firmation message will appear: Are you sure you wish to change this
device's configuration?
6. Highlight
Y
main display.

Advanced Options menu

The Temp sensor Advanced Options menu contains two categories: In-
stance and Restore Defaults.

Instance

The Instance command is intended for use only by experienced NMEA
2000 network technicians. Instance allows network technicians to re-
solve certain electronic probe conflicts. This is most likely to occur if the
network includes LMF-200 or LMF-400 digital gauges, which support
the display of fewer electronic probes than your GPS or sonar/GPS unit.
| , use ↑ ↓ to select
MENU
and press
S
US ETUP
. Press
ENT EXIT
| , use ↑ ↓ to select
MENU
and press
S
US ETUP
and press
T
EMP YPE
and press
ENT
ES
NMEA 2000
, which will open the Bus Configu-
ENT
repeatedly to get back to the main dis-
NMEA 2000
, which will open the Bus Configu-
ENT
ENT
. The following list of Temp Types
ENT
. Press repeatedly to get back to the
EXIT
134
and press
ENT
and press
. The Device Configura-
. The following con-
ENT
. The
ENT
. The De-
. The
ENT