Orange Pi Mini User Manual page 10

Orange Pi User Manual
iii. Click "Write" button. Wait patiently to successfully complete
writing.
Linux:
1. Insert your TF card into your computer. The size of TF should be
larger than the OS image size, generally 4GB or greater.
2. Format the TF card.
fdisk –l
i. Run
umount
ii.Run
sudo fdisk
iii. Run
command to delete all partition of TF card and use
one new partition. Use
sudo mkfs.vfat /dev/sdx1
iv. Run
partition of TF card as FAT32.
(x should be replaced according to your TF card node)
You can also jump this step under Linux, because write image command
dd
under Linux will format the TF card automatically.
3. Download the OS image from the Downloads webpage.
i. Website:http://www.orangepi.org/downloaded/download.html
4. Unzip the download file to get the OS image
image,android os image need other burn
unzip
i.Run
5. Write the image file to the TF card.
fdisk –l
i. Run
ii.Verify if the hash key of the zip file is the same as shown on the
downloads page (optional).
sha1sum
This will print out a long hex number which should match the "SHA-1"
line for the TF image you have downloaded
iii.
Run umount
iv
.Run sudo dd bs=4M
image file to TF card. Wait patiently to successfully complete writing. Please note
that block size set to 4M will work most of the time, if not, please try 1M, although
1M will take considerably longer.You can use sudo pkill –USR1 –n –x
dd command to check progress.
www.orangepi.org
/dev/sdx
command to check the TF card node.
/dev/sdxx
to unmount all the partitions of the TF card.
/dev/sdx
command to configure TF card. Use
w
command to save change.
[downloaded filename]
/dev/sdx
command to check the TF card node.
[path]/[imagename]
/dev/sdxx to unmount all the partition of the the TF card
if=[path]/[imagename] of=/dev/sdx
Shenzhen Xunlong Software CO., Limited
command to format the new created
(exclude android os
mode.).
command.
o
n
command to add
command to write
www.xunlong.tv