Table of Contents
Advertisement
(2) Press the SOURCE select button to select the USB mode.
(3) Total numbers of the folders and total numbers of files to play are displayed.
If no files to play, then "NO FILE" is displayed.
If a USB memory is not inserted "NO USB" is displayed.
(4) Select a track to playback using the SELECT button and the ENCODER switch.
- Select
using the SELECT button and select a folder by turning the ENCODER switch.
can be selected only when the USB has folder.
- Select I ◀ ◀ ▶ ▶ I using the SELECT button and select a track to playback by turning the the
ENCODER switch.
(5) Press the
To skip the track during playback, select I ◀ ◀ ▶ ▶ I using the SELECT button and select the track to
playback by turning the ENCODER switch.
(6) Press the
Press the
※ Note : When the track which status is not good or which format is not compatible, the window
displays "PL Y ERROR". The error track is skipped and playback the next track.
2. REPEAt
(1) REPE T 1: Playback the file selected repeatedly.
(2) REPE T GROUP: Playback the GROUP selected repeatedly.
(3) REPE T LL: Playback the disc, USB, or a memory disc repeatedly.
3. AUtO PLAy
UTO Play is the function to preset the source (CD, USB or Memory disc) to playback and to playback
the preset source when the power of the CD-610U is turned on.
1) UTO PL Y setting
To set the UTO PL Y function, set the UTO PL Y switch to ON position.
64 folders / 257 files
button to play.
button again to pause.
button to stop.
CD/MP3/WM /W V PL YER
CD-610U
9
Advertisement
Table of Contents
