Navigation Page - Lowrance LCX-104C Operation Instructions Manual

rently has. The smaller the position error number, the better (and more
accurate) the fix is. If the position error flashes dashes, then the unit
hasn't locked onto the satellites, and the number shown isn't valid.
The Satellite Status Page has its own menu, which is used for setting
various options. (Options and setup are discussed in Sec. 8.) To access
the Satellite Status Page Menu, from the Status Page, press

Navigation Page

This screen has a compass rose that not only shows your direction of
travel, but also the direction to a recalled waypoint. To get to the Navi-
gation Page: Press
The navigation screen looks like the one below when you're not navi-
gating to a waypoint or following a route or trail. Your position is
shown by an arrow in the center of the screen. Your trail history, or
path you've just taken, is depicted by the line extending from the arrow.
The arrow pointing down at the top of the compass rose indicates the cur-
rent track (direction of travel) you are taking.
Track or compass heading indicator, showing direction of travel
Navigation
information
displays
Trail line
Navigation Page, recording a trail, traveling east. Page looks like
this when the unit is not navigating to a waypoint , following
When navigating to a waypoint, the Navigation screen looks like the
following figure. Your ground speed, track, distance and bearing to
waypoint, and course are all shown digitally on this screen.
| → or ← to
PAGES
a route, or backtracking a trail.
N
AVIGATION
96
MENU
| .
EXIT
.
Compass
rose
Present
position
arrow