Lowrance LCX-104C Operation Instructions Manual page 90

1. Press
MENU
2. Press ↓ to
3. Press ↓ or ↑ to select chart name|
| |
O ENT EXIT
N
While you're in the Sonar Simulator menu, don't forget to check
Simulate Position if you want to run the sonar and GPS simulators
simultaneously. As you review sonar logs, you can create waypoints
to mark sites you want to return to.
While the simulator is running, you can switch from one chart log
to another by opening the Sonar Simulator menu and using the in-
structions in step 2 to select a different chart.
Tip:
There's more than one way to play a recorded sonar chart. You can
also turn on the simulator from the MMC files list. Here's how:
1. Press
MENU
2. Press ↓ or ↑ to chart name|
Menu sequence for playing a sonar chart log from the MMC File List.
NOTE:
For some great practice, try running the Sonar Simulator and the
GPS Simulator at the same time. This will really give you a feel for
how the unit will work in the field.
NOTE:
If you turn on your unit before attaching a transducer, it may enter
a demo mode. The words "demo mode" flash on the bottom of the
screen and a sonar chart plays much like the simulator. Unlike the
simulator, the demo mode is for demonstration only, and will auto-
matically stop as soon as you turn on the unit with a transducer at-
tached. The simulator will continue to function normally.
| |↓ to
MENU S
|
C U ENT
HART SED
.
| |↓ to
MENU
|
S ENT
ONAR ETUP
.
B MMC F
ROWSE ILES
|↓ to
ENT P
82
|↓ to
S S
ONAR IMULATOR
|↑ to
ENT S
ONAR
| | .
ENT ENT
| | .
ENT EXIT
LAY
| .
ENT
S
IMULATOR