Units Of Measure - Lowrance LCX-104C Operation Instructions Manual

On the Edit Trail menu, press ↓ or ↑ to highlight the section you wish
to change, then press
this menu.
You can also change the trail line color and pattern. For instructions,
see the entries on Edit a Trail Color and Edit a Trail Pattern beginning
on page 131, Sec. 7, Advanced GPS Operations.

Units of Measure

This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahrenheit
or Celsius) and heading (true or magnetic) units. To change the units:
Press |
MENU MENU
System Setup Menu, left, Units of Measure Menu, right.
To set Speed/Distance Unit of Measure: Press ↑ or ↓ to change the
Speed/Distance, then press
| |
EXIT EXIT EXIT
To set Heading: Press ↑ or ↓ to change the heading type, then press
. After the option is set, press
ENT
display.
To set Depth: Press → to
type, then press
return to the page display.
To set Temperature: Press → ↓ to
the heading type, then press
| |
EXIT EXIT EXIT
. Make your changes, then press
ENT
|↓ to
S
YSTEM
to return to the page display.
D
. After the option is set, press
ENT
to return to the page display.
| |
S ENT ENT
ETUP
. After the option is set, press
ENT
|
EXIT EXIT
. Press ↑ or ↓ to change the heading
EPTH
T
EMPERATURE
. After the option is set, press
ENT
165
.
| to return to the page
EXIT
|
EXIT
. Press ↑ or ↓ to change
to erase
EXIT
| to
EXIT EXIT