8.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
3.1.9 Navigate to a location stored in a photo
You can also set the location stored in a photo as your destination. Do as follows:
1.
In the Find menu, tap
2.
A list of the photos stored in the device appear. Select a photo to set its location as the
destination.
3.
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
new location. Tap
4.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
Only geotagged JPG files contain location information. That is why these kind of
files can only be used in navigation. Other picture files do not appear in the list.
Note!
Files must be located on an inserted microSD card, either in the root folder or in a
"pictures" folder.
60 NX504E English
and start your journey.
to confirm the destination, or tap
to select a different destination.
and start your journey.
and then tap
to modify route
.
) appears at the
to modify route