Navigate To A Location Stored In A Photo - Clarion NZ501E User Manual

3.1.8 Navigate to a location stored in a photo

You can also set the location stored in a photo as your destination. Do as follows:
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap
3. Open the
4. The list of photos stored in the device appears. Select one photo from the list.
5. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
new location. Tap
6. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
Note!
Only geotagged JPG files contain location information. That is why these kind of
files can only be used in navigation. Other picture files do not appear in the list.
Files must be located on an inserted SD card or USB pendrive, either in the root
folder or in a "pictures" folder.
50 NX501E/NZ501E English
menu and tap
to confirm the destination, or tap
to select a different destination.
and start your journey.
to return to the Navigation
.
.
) appears at the
to modify route