Reset Options - Lowrance HD LCX-110C Operation Instructions Manual

in a large amount of clutter appearing on the screen. If this occurs, just
decrease the sensitivity to a level that eliminates the clutter. When you
turn HyperScroll off, you can return to your original sensitivity level.
Sonar Menu with Ping Speed command selected (left).
The Ping Speed Control Bar (right) at default setting.
To change Ping Speed:
1. From the Sonar Page, press
2. The Ping Speed Control Bar appears. Press ↑ to increase ping speed;
press ↓ to decrease ping speed. When it's set at the desired level, press
To turn off HyperScroll:
1. From the Sonar Page, press
2. The Ping Speed Control Bar appears. Press ↓ to decrease ping speed
to 50 percent. When it's set at the desired level, press
When you boost ping speed and switch into HyperScroll, the width of
the FasTrack bar graph display doubles at the right side of the screen.
This allows you to better see the virtually instantaneous sonar returns,
just as you would on a flasher sonar unit. For more information on
FasTrack, see its entry in this section.

Reset Options

This command is used to reset all features, options and settings to their
original factory defaults. This is useful when you have changed several
settings and want to return the unit to basic automatic operation.
1. Press
MENU
2. Press ← to
Y
3. All the menus are cleared and the unit reverts to the Map Page at
the 4000-mile zoom range, just as if you had turned it on for the first
time. All options have been returned to the factory settings.
| |↓ to
MENU S
| .
ENT
ES
|↓ to
MENU
|↓ to
MENU
|
S ENT
YSTEM ETUP
76
|
P S ENT
ING PEED
|
P S ENT
ING PEED
EXIT
|↓ to
R O
ESET
.
.
EXIT
.
.
| .
ENT
PTIONS