Fastrack - Lowrance HD LCX-110C Operation Instructions Manual

2. To set the upper limit, press
number, then press → to move the cursor to the next number and
repeat until the depth is correct, then press
3. To set the lower limit, press ↓ to
change the first number, then press → to move the cursor to the next
number and
| |
EXIT EXIT EXIT.
Area "zoomed"
Normal display, in auto depth range mode, (left); Display "zoomed" with
Upper and Lower Limits focusing on the portion of the water column
from 25 feet to 45 feet deep (right). In the "zoomed" image on the right,
note the target definition, showing two fish holding just off the structure.
To turn off upper and lower limits:
From the Sonar Page, press
FasTrack
This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The rest of the screen continues to
operate normally. FasTrack gives you a rapid update of conditions
directly under the boat. This makes it useful for ice fishing, or when
you're fishing at anchor. When the boat is not moving, fish signals are
long, drawn out lines on a normal chart display. FasTrack converts the
graph to a vertical bar graph that, with practice, makes a useful
addition to fishing at a stationary location.
repeat until
MENU
. Press ↑ or ↓ to change the first
ENT
EXIT
L L
OWER
the depth
|↓ to
A D
UTO
66
.
. Press ↑ or ↓ to
|
ENT
IMIT
is correct,
Fish arches
|
R ENT
EPTH ANGE
then press
|
EXIT.