Lowrance HD LCX-110C Operation Instructions Manual page 183

selection list by pressing
from the list and press
city field.
NOTE:
We recommend you do not enter a city name unless the list is too
long to search through. The unit can search more quickly when you
don't enter a city name.
Find city field (left); search in particular city only option (center); Find
When the necessary search fields are filled in, press ↓ to
6.
|
A ENT.
DDRESS
address. (If an address is not in the database, a message appears
saying the address could not be found.)
7. The unit will display a list of addresses. If the address you are
looking for is highlighted at the top of the list, press
and ↑ to select the correct address from the list, then press
Map Page will appear with the location selected by the cursor. (In the
example below, there were two addresses found, but we are looking for
12303 East 11th Street, not 11th Court, so we had to scroll down the list
to select the correct address.)
Address search result list (left); Address page options, Find or Go To
(center). After the address is located, you can navigate to it (right).
8. To navigate to the address, press
begin showing navigation information to the address pointed out by the
cursor. If you are only looking up an address (not navigating), just
press to see the location pinpointed on the map.
ENT
ENT
ENT.
City by name (right).
Your unit asks you to wait while it searches for the
, then press ↓ or ↑ to select a city name
The city name you selected is now in the
|→|
ENT
175
. If not, use ↓
ENT
and your unit will
ENT
F
IND
. The
ENT