Changing The Road Types Used In Route Planning - Clarion NX503E Owner's Manual

3.4.9 Changing the road types used in route planning

To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings (page 89).
1. On the Map screen, tap
2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road
types. You have the following options (their order depends on the selected vehicle
type):

a slow car or you are towing another vehicle.

pass or vignette to use the road for a longer period of time. They can be
enabled or disabled separately from toll roads.

there is a per-use charge) in the routes by default. If you disable toll roads,
Clarion Mobile Map plans the best toll-free route.

default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.

unpaved roads can be in a bad condition and usually you cannot reach the
speed limit on them.
3. Tap
route. The orange line now shows the new recommended route.
70 NX503E English
and then tap
- You might need to avoid motorways when you are driving
- Charge roads are pay roads where you can purchase a
- Clarion Mobile Map includes toll roads (pay roads where
- Clarion Mobile Map includes ferries in a planned route by
- Clarion Mobile Map excludes unpaved roads by default:
to confirm the changes. Clarion Mobile Map recalculates the
.