Combined Search - Navigating To A Place Of Interest - Clarion NX503E Owner's Manual

Note!
The alternative way to search for an address is to tap the
Destination menu. Unlike the Combined Search, this alternative search method
is a structured one where you can define the parts of the address separately.

3.1.1.4 Combined Search - Navigating to a Place of Interest

To find a Place of Interest in Combined Search, carry out the search as described earlier.
Search for a part of its name. When you get to the result screen, do as follows:
1. Tap at the top of the screen.
2. The list is now filtered. What you see is the list of matching Places ordered by their
distance from your current location.
3. (optional) Should your product contain Places from different data providers, you can
further narrow the list by showing Places from one provider only. Look for the provider
logos at the top of the screen. Tap one of them to see Places from that provider only.
4. Scroll down the list if necessary and then select one of the Places from the list.
5. Once the destination is selected, a full screen map appears with the selected point in
the middle. If necessary, tap the map somewhere else to modify the destination. The
Cursor ( ) appears at the new location. Tap
destination, or tap
6. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
route parameters, or tap
32 NX503E English
button in the
to confirm the
to select a different destination.
and start your journey.
to modify