Table of Contents
Advertisement
Standalone Client
occur. Set display duration by moving the slide bar or inputting a
number directly. (1sec~60sec)
⑦ Enable Live Popup: Enable/ Disable live displaying popup when
events occur. Set display duration by moving the slide bar or
inputting a number directly. (1sec~60sec)
⑧ Output control: Operating mode for alarm outputs.
▪
Cut Output: Enable/ Disable stopping Alarm out signal
after 1 second.
▪
Keep Output: Enable/ Disable keeping Alarm out signal
⑨ Enable / Disable the function that turns the digital output state to
"OFF" state when a channel is selected.
⑩ Enable Ignore MD Event Delay: Enable/ Disable and set duration
between motion detection events. Set delay duration by moving
the slide bar or inputting a number directly. (1sec~200sec)
⑪ Enable Auto Light Return to Normal: Enable/ Disable Automatic
turning off lights for PTZ cameras. Set delay duration by moving
the slide bar or inputting a number directly. (1sec~200sec)
⑫ Event duration.
※
Sec : second / 1800s (30minutes)
90
Advertisement
Table of Contents
