Table of Contents
Advertisement
Standalone DVR Set Manual
Sensor In & Alarm Out Configuration
[Screen 5- 6] Sensor In & Alarm Out Configuration
Configure SENSOR In or ALARM Out box to configure settings for
SENSOR In or ALARM Out. In the above picture, each rows mean
Video channels and each columns mean the channel of Sensor or
Alarm. It's available to configure multiple Sensors or Alarms to a
Video channel and to configure multiple Video channels to a Sensor
or Alarm channel.
① Select one item to configure Sensor or Alarm
② In the O/X table, configure which Sensor device or Alarm
device to connect to which video channel.
'O' means Sensor of Alarm is assigned to a video channel,
'X' means Sensor of Alarm is NOT assigned to any video
channel.
③ Set up sensor (alarm in) type and alarm (alarm out) type on
the bottom.
※
NC: Normal Close
NO: Normal Open
52
①
②
③
Advertisement
Table of Contents
