Onix N4120 User Manual page 65

▪
AUTO PORT
This option enables the DVR set to configure Port
Forwarding setting of an IP router automatically when
the DVR set is connected to an IP router in a LAN
environment.
It sets the network port number for both the DVR set
and an IP router side by the setting value ① without
additional configuring an IP router.
▪
AUTO B/W (Automatic Bandwidth)
It sets the DVR streaming bandwidth with the value of
user configuration.
To make the streaming bandwidth within the bandwidth
of a network, it configures FPS and Image Quality
settings automatically.
▪
TWO WAY AUDIO
It enables bi-directional audio between a net client and
the DVR set.
▪
REMOTE SETUP GUIDE
It enables the DVR operator can monitor remote
configuration with real time.
③ Video Resolution, quality, audio, and frame rate table is as
follows,
ALL Apply the same settings to all channels
CH
Channel specific setting
ON
Select to turn on/off recording of a channel
Network bandwidth for streaming video varies by
VBR
motion with this setting. More motion takes more
network bandwidth.
RESOLUTION Adjust video resolution
QUALITY
Adjust video quality
AUDIO
Select ON to record audio
Adjust frame rate (fps) for the streaming speed of
FRAME
the selected channel
Standalone DVR Set Manual
63