Delete Trail - Lowrance GlobalMap 5000C Operation Instructions Manual

From the Trails Menu, press → to
highlighted, press
T
RAIL
off).
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
From the Trails Menu, press → to
Press
C .
RITERIA
the Update Rate data entry box appears on the menu. If you selected
Distance, the Update Distance data entry box appears on the menu.
Trail Update (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 miles.
With one of the Update Criteria selected, use the cursor arrows to
highlight either the
. Press ↑ or ↓ to change the first character, then press → to
press
ENT
the next character and repeat until the entry is correct. Press
return to the Trail Options Menu.
Trail Options menu: Update Time setting, left, and Update Distance
Specific Trail Options

Delete Trail

To delete a specific trail: From the Trails Menu, press ↓ to Trail
Name|
. The Edit Trail menu appears as seen in the following fig-
ENT
ure. Press → to
ENT
to select criteria type|
↑ ↓
or
U R
PDATE
|
D T ENT
ELETE RAIL
T O
RAIL PTIONS
to check it (turn on) and uncheck it (turn
T
RAIL
or
U D
ATE PDATE
setting, right.
|← to
Y
ES
91
| . With
ENT
|
O ENT
PTIONS
. If you selected Time,
ENT
data entry boxes and
ISTANCE
| .
ENT
U A
PDATE CTIVE
|↓ to
U
PDATE
to
EXIT