File Management; Saving The Pattern As A File - Janome MB-4S Instruction Book

z
1 1 1028
2 1117
2
3 1031
3
1028
1 4
2 5 1117
3 6 1031
1028
1 7
2 8 1117
x
Save File
Location :
0.1/3MB
c
Save File
Location :
0.1/3MB
Embf
e
v
Save File
File Name :
0.1/3MB
M_001
b
1 1 1028
1117
2 2
3 3 1031
1 4 1028
2 5
1117
3 6 1031
1028
1 7
2 1117
8
240x200mm 4/8
59 min
1 / 13 Colors
1 / 22479 ST
q
w
New
Rename
r
Rename
t
240x200mm 4/8
59 min
1 / 13 Colors
1 / 22479 ST

File Management

Saving the Pattern as a File

z Press the circle key next to the save file icon in
the Ready to Sew mode.
q Circle key (save file)
x Press the circle key next to the icon of the
memory location to where you wish to save the
file.
w Circle keys (memory location)
NOTE:
If the memory devices are not connected to the RCS
unit, the icon of the device will be grayed out.
c The folder list window of the selected memory
location will open.
Press the desired folder icon to open.
e Folder icon
v The file list window of the selected folder will
open. If there is no file saved in the folder, a blank
list will be displayed.
The file name will be automatically assigned from
M_001. To assign the desired name to the file,
press the circle key next to Rename (refer to next
page).
Press the OK key to save the pattern as a file.
r Circle key (Rename)
t OK key
b The screen will return to the Ready to Sew
window and the file will be saved under the
assigned name.
75