Map Datum Selection; Map Detail Category Selection - Lowrance AirMap 2000C Operation Instructions Manual

To set range rings: Press
. With the option highlighted, press
R
INGS
uncheck it (turn off). After the option is set, press
page display.
To set Lat/Lon Grid: Press
L /L G L
AT ON RID
(turn on) and uncheck it (turn off). After the option is set, press
return to the page display.

Map Datum Selection

Maps and charts are based on a survey of the area that's covered by the
map or chart. These surveys are called "Datums." Maps that are cre-
ated using different datums will show the same latitude/longitude in
slightly different locations.
All datums are named. The GPS system is based on the WGS-84 da-
tum, which covers the entire world. Other datums may also cover the
entire world, or just a small portion of it. By default, your position
shows using the WGS-84 datum. However, it can show your position
using one of 191 different datums.
To change the datum:
1. Press
MENU
2. Scroll ↓ or ↑ to select the desired datum, then press
3. To return to the last page displayed, press
A list of the datums used by this unit is in the back of this manual.
GPS Setup Menu, left, Map Datum Menu, right.

Map Detail Category Selection

This menu determines which of the mapping features are shown on the
screen. This includes, waypoints, trails, icons, cities, highways, etc. You
can selectively turn on or off any of these items, customizing the map to
your needs.
. With the option highlighted, press
INES
| |↓ to
MENU GPS S
|↓ to
MENU M
AP
|↓ to
MENU
|
ENT
ETUP
90
. Press ↓ to
|
D ENT
ATA
to check it (turn on) and
ENT
EXIT
|
M D ENT
AP ATA
|↓ to
D S
ATUM ELECTION
ENT
| .
EXIT EXIT
R
ANGE
to return to the
. Press ↓ to
to check it
ENT
EXIT
| .
ENT
.
to