Lowrance AirMap 2000C Operation Instructions Manual page 59

To transfer data from AirMap to the MMC: press
To transfer data from the MMC to AirMap: press → to
3. Saving: A file name box appears. To accept the default name "Data"
for the GPS Data File, press ↓ to
the file (as in the following example), press
box. Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
| .
S ENT
AVE
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from AirMap's memory onto an MMC.
The unit will display first a progress then a completion message when the
data transfer is finished. To return to the Page view, press
4. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
to highlight the file, then press
↓ to
|
L ENT
OAD
data transfer is finished. To return to the Page view, press
From left to right, these figures show the menu sequence for loading a
GPS Data File from an MMC into AirMap's memory.
ENT
. The unit will display a completion message when the
|
S D ENT
AVE ATA
ENT
to activate the selection box, use ↓ or ↑
to accept the selection. Next, press
ENT
53
(for
ENT S
AVE
|
L
OAD
. If you wish to rename
to activate the selection
|
EXIT
EXIT
.)
.
ENT
|↓ to
ENT
.
EXIT
| .
EXIT