Advertisement
Disassembly procedures
8
8.1
Disassembly procedures for indoor unit
Operation procedures/pictures
Disassembling panel
Push the panel with hand and release the
movable latch on the panel, and then lift it
upward to take out the panel.
As shown in Fig.8-1
Disassembling filter
screen and wire clamp
Top the medium section of filter to shed off
catches at the both sides. Pull forward to
disassemble the filter.
Screw out with a screwdriver one screw that
fixes the wire clamp and remove the wire
clamp.
As shown in Fig.8-2
Disassembling air
guide louver board
Firstly remove the middle section of the
guide louver from the support frame and
then bend slightly the guide louver to remove
the guide louver.
As shown in Fig. 8-3
Latch
Filter net
Air guide board
—40—
Panel
Fig.8-1
Tension disc
Fig.8-2
Fig.8-3
Advertisement
